products

SPMG050204 Carbide Drill Inserts with Cutting Brisk and Smooth

Basic Information
Place of Origin: CHINA
Brand Name: MMM
Certification: ISO 9001
Model Number: SPMG050204-GM
Minimum Order Quantity: 10 PCS
Price: USD
Packaging Details: Internal Plastic Box Packaging
Delivery Time: 5-10 Days
Payment Terms: L/C, T/T
Supply Ability: 100,000 PCS/Month
Detail Information
Material: Cemented Carbide Coating: PVD
Processing Material: General Material Application: Drilling
Standard: ISO Grade: MP2253
Type: SPMG050204-GM Chipbreaker: M-Level Accuracy, Cutting Brisk
High Light:

trigon carbide inserts

,

tungsten carbide inserts


Product Description

SPMG050204 Carbide Drill Inserts for General Drilling with Cutting Brisk and Smooth

 

 

Technical Information:

  • The two common types of insert wear are flank wear and crater wear.
  • When the flank wear and crater wear exceed a certain value, the insert should be replaced in time, which is safer and more economical.
  • Usually flank wear is a form of natural wear, especially for outer inserts with higher cutting speeds. However, this wear will eventually result in the cutting edge of the insert not being able to machine the required tolerances and high surface quality.
  • Chip formation and chip evacuation are important issues in drilling.
  • Chip formation and chip removal depend on the workpiece material, insert geometry selection, coolant pressure, capacity, and cutting parameters.
  • Chip clogging can cause the drill bit to move radially and affect hole quality, bit life and reliability.
  • Typical applications for indexable insert bits:
    • Compared with drills of other structures, the use of indexable insert drills for hole drilling is more efficient and economical.
      • Medium tolerance requirements
      • Medium and large diameter holes
      • Need flat bottom blind hole
      • Insert drilling or boring
  • The value of the cooling pressure is very important. If the pressure is too low, it will cause vibration and shorten the life of the insert.

 

Feature Advantage:

  • High toughness ultra-fine cemented carbide substrate with good edge strength.
  • Optimized cutting edge design, the cutting process is more stable and the chip breaking is better.
  • The combination of grades and chip-breakers makes all kinds of machining problems easy to solve.
  • Square insert, four cutting edges, more economical.
  • The same insert can be installed on the center edge and the outer edge, while meeting the requirements of the center and outer edge, economic and efficiency.

 

  • Grade MP2253:
    • Special coating process makes the surface of the insert smooth, effectively reducing friction and making chip removal smoother.
    • Unique nanostructured coating, the coating is more tightly bonded to the substrate, and has higher toughness and hardness.
    • Special surface treatment technology after coating to remove harmful stress and improve the surface quality of the insert.
    • Both the inner and outer edges can meet the physical performance requirements of the insert.

 

  • Types:
Type MP2253
SPMG050204-GM
SPMG060204-GM
SPMG07T308-GM
SPMG090408-GM
SPMG110408-GM
SPMG140512-GM

 

 

Recommended Cutting Parameters:

  • The following cutting parameters are the recommended range values, which should be adjusted as appropriate after considering the following factors:
    • Specific physical properties of the material being processed
    • Power and rigidity of the machine tool
    • Clamping rigidity of tools and workpieces
    • Balance between tool life and processing efficiency

 

 

ISO

 

Material

Hardness

(HB)

Diameter

(mm)

Feed

(mm/r)

Speed

(m/min)

 

 

P

 

 

Carbon Steel

 

 

80-200

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.09

0.05 - 0.09

0.06 - 0.10

0.07 - 0.11

0.08 - 0.12

 

 

170 - 240

 

 

P

 

 

Low Alloy Steel

 

 

150-260

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.09

0.05 -0.12

0.06 - 0.14

0.08 - 0.16

0.10 - 0.20

 

 

140 - 220

 

 

P

 

 

High Alloy Steel

 

 

150-320

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.09

0.05 - 0.12

0.06 - 0.16

0.08 - 0.18

0.10 - 0.22

 

 

120 - 180

 

 

P

 

 

Cast Steel

 

 

180-250

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.08

0.05 - 008

0.06 - 0.10

0.07 - 0.11

0.07 - 0.12

 

 

120 - 170

 

 

M

 

 

Ferritic Stainless Steel

Martensitic Stainless Steel

 

 

150-270

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.09

0.05 - 0.12

0.06 - 0.16

0.08 - 0.18

0.10 - 0.22

 

 

110 - 230

 

 

M

 

 

Austenitic Stainless Steel

 

 

150-275

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.09

0.05 - 0.11

0.06 - 0.13

0.08 - 0.14

0.10 - 0.16

 

 

110 - 220

 

 

K

 

 

Malleable Cast Iron

 

 

150-230

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.10

0.05 - 0.14

0.08 - 0.16

0.10 - 0.20

0.12 - 0.24

 

 

120 - 220

 

 

K

 

 

Gray Cast Iron

 

 

150-220

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.10

0.05 - 0.14

0.08 - 0.16

0.10 - 0.20

0.12 - 0.24

 

 

170 - 240

 

 

K

 

 

Ductile Iron

 

 

160-250

13.0 - 21.0

22.0 - 33.0

34.0 -41.0

42.0 - 50.0

51.0-58.0

0.05 - 0.09

0.05 - 0.12

0.06 - 0.14

0.08 - 0.16

0.10 - 0.20

 

 

130 - 200

 

SPMG050204 Carbide Drill Inserts with Cutting Brisk and Smooth 0

 

 

 

Contact Details
admin

WhatsApp : +8618673357990